 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
||||||
|
Laser Diode Drivers A laser diode driver is required for all DPSS green lasers. These drive circuits are designed for laser diodes requiring 100mA to 1500mA. We have several available to suit your needs. DC Input with TTL Modulation
laser diode driver. This unit provides a fixed current that is optimized for the laser you select. It features user selectable TTL modulation up to 10Khz (works well for laser light-show blanking) via 5Vdc signal. Dimensions: 2 in x 1 in x 1 1/4 in. Input: 3.3 to 5Vdc Soft-start protected.
Open Cicuit Board
laser diode driver. Adjustable current: 0 to 1500mA. The laser diode current can be monitored with a voltmeter using test pins on the circuit board. 4.5 to 6.0 Vdc input. Soft-start protected. Note: Due to the user adjustable current, we cannot warranty the laser used with this driver.
|
 |
||||||||||||||||
|
Item #: DPSDR3 |
|||||||||||||||||
|
[Home] [About Us] [Products] [Purchasing] [Laser Info.] [Search] |
|||||||||||||||||
|
Site text and graphics © 1998-2008 Midwest Laser Products LLC. All rights reserved. |
|||||||||||||||||
|
Phone (815) 462-9500 FAX (815) 462-8955 email |
|||||||||||||||||
